CRS100C高壓共軌試驗臺是在傳統試驗臺的基礎上進行嫁接改造的設備，該設備既可以對歐2噴油泵進行檢測，也可以對歐3共軌泵、共軌噴油器進行檢測。其廣泛應用于對原有歐2設備的改造升級和各高校的培訓教學。軌道壓力為：0～2100bar,由博世共軌噴油泵提供；軌壓由電腦控制部分實時測控并調節?？蓪?duì)BOSCH、SIEMENS、DELPHI、DENSO廠家生產的共軌噴油器、噴油泵、共軌管及普通噴油泵（歐Ⅱ）進行檢測與調試。電腦控制部分由工業計算機控制，windows系統；內置400余種博世及10幾種電裝噴油器調試數據，數據可以查詢并可自主生成數據并存儲。該產品性能穩定、測量準確、有機玻璃防護門，操作易觀測更安 全。

一）、高壓試驗臺特點： 

1、工業計算機實時控制，公司自主研發共軌測試系統，windows軟件 系統；

2、采用博世高壓共軌噴油泵產生0～2100bar壓力；

3、軌壓實時測量與控制，并具有超壓保護功能；

4、噴油器驅動信號脈寬及頻率可調；

5、噴油器噴射次數可自由設定；

6、博世、電裝、德爾福、西門子等噴油器調試數據近三千種；

7、短路保護功能；

8、測量準確、操作簡便、低噪節能

二）、高壓共軌試驗臺測試功能（歐Ⅲ）

1、共軌噴油器密封性能檢查

2、共軌噴油器電磁閥性能檢測

3、共軌噴油器霧化觀察

4、共軌噴油器噴油量均勻性檢測

5、共軌噴油器啟動油量測試

6、共軌噴油器滿載油量測試

7、共軌噴油器怠速油量測試

8、共軌噴油器預噴油量測試

9、共軌噴油器自定義油量測試

10、共軌管密封性能檢測

11、共軌管安 全閥性能檢查

12、共軌管壓力傳感器性能檢查

13、共軌泵密封性檢測

14、共軌泵共軌壓力檢測

15、共軌泵供油量檢測

功能（歐Ⅱ） 

1、測試不同轉速下的各缸供油量

2、靜態檢查各缸供油時間

3、檢查機械調速器性能

4、分配泵電磁閥的試驗

5、檢查氣動調速器性能

6、檢查壓力補償器性能

7、分配泵回油量測量

8、測量分配泵泵體內壓

9、測量齒桿行程

10、進行噴油泵密封性試驗

Crs100c high pressure common rail test bench is a grafting equipment based on the traditional test bench. This equipment can detect not only Euro 2 fuel injection pump, but also Euro 3 common rail pump and common rail injector. It is widely used in the transformation and upgrading of the original Euro 2 equipment and the training and teaching of colleges and universities. Rail pressure: 0 ~ 2100bar, provided by Bosch common rail fuel injection pump; The rail pressure is measured and adjusted in real time by the computer control part. It can detect and debug the common rail fuel injector, fuel injection pump, common rail pipe and common fuel injection pump (Euro II) produced by Bosch, Siemens, Delphi and Denso manufacturers. The computer control part is controlled by industrial computer and windows system; There are more than 400 kinds of debugging data of Bosch and more than 10 kinds of electric fuel injectors, which can be queried, generated and stored independently. The product has stable performance, accurate measurement, plexiglass protective door, easy operation and safer observation.

一） High voltage test bench features:

1. Industrial computer real-time control, the company independently developed common rail test system, windows software system;

2. Bosch high pressure common rail fuel injection pump is used to generate 0 ~ 2100bar pressure;

3. Real time measurement and control of rail pressure, with overpressure protection function;

4. The pulse width and frequency of fuel injector driving signal are adjustable;

5. The injection times of the fuel injector can be set freely;

6. There are nearly 3000 kinds of fuel injector commissioning data from Bosch, Denso, Delphi, Siemens, etc;

7. Short circuit protection function;

8. Accurate measurement, simple operation, low noise and energy saving

二） High voltage common rail test bench test function (Euro III)

1. Sealing performance inspection of common rail injector

2. Performance test of common rail injector solenoid valve

3. Atomization observation of common rail injector

4. Uniformity detection of fuel injection quantity of common rail injector

5. Common rail injector starting fuel quantity test

6. Full load fuel test of common rail injector

7. Idle fuel quantity test of common rail injector

8. Pre injection quantity test of common rail injector

9. Custom fuel quantity test of common rail injector

10. Sealing performance test of common rail pipe

11. Performance inspection of common rail pipe safety valve

12. Performance inspection of common rail pressure sensor

13. Sealing test of common rail pump

14. Common rail pressure detection of common rail pump

15. Common rail pump oil supply detection

Function (Euro II)

1. Test the fuel supply of each cylinder at different speeds

2. Statically check the oil supply time of each cylinder

3. Check the performance of mechanical governor

4. Test of distribution pump solenoid valve

5. Check the performance of pneumatic governor

6. Check the performance of pressure compensator

7. Measurement of oil return volume of distribution pump

8. Measure the internal pressure of the distribution pump

9. Measure the gear rod travel

10. Conduct fuel injection pump sealing test

溫馨提示：高壓共軌試驗臺CRS100C英文介紹來自百度翻譯，僅供參考。